Antrica ANT-32000

Home/Infrastructure/Antrica ANT-32000

Antrica ANT-32000

Full HD 1080P H.264 Video Encoder/Decoder

The ANT-32000 offers Full HD video and audio encode plus decode and full duplex mode and can be used in several ways.

Firstly it can be used as al High Definition (HD) IP video server where video and audio sources are connected to it and the unit is connected to a network. Any PC that can reach it over the network can view the HD Video, listen to the audio and access all of its control features either using the supplied CMS (Central Management Software) or via a browser.

Secondly two units can be set up as an encoder / decoder pair. The signals (HDMI video, audio & control) arriving at the encoder will be decoded by the decoder. This is ideal for transmitting high quality video between 2 points in a building which has already had a network installed or between remote locations which are connected to the internet. Each unit can act as both an encoder and decoder allowing a 2 way video / audio link.

The ANT-32000 is available in two versions:

1) ANT-32000A has HDMI and Composite inputs and Outputs
2) ANT-32000AS additionally has an HD/SD-SDI interface


  • Up to 30fps at 1920 x 1080
  • Dual Streaming (H.264/H.264, H.264/MJPEG)
  • MPEG2-TS Supported
  • Two Way Audio Communication (G.711, AAC)
  • HDMI Video In/Output
  • Composite Video In/Output
  • HD/SD-SDI Video In/Output – Optional
  •  PoE (Power Over Ethernet)
  •  USB Recording
  •  Watchdog for System Recovery
  •  RS-232, RS-422/485 Communication
  •  Motion Detection
  •  2CH Sensor Input / 2CH  Alarm Output
  • Adjustable Video Bitrate : 32Kbps ~ 10Mbps for Primary Video, 32Kbps ~ 1Mbps for Secondary Video
  •  Adjustable Video Data Bandwidth : 2,400bps ~ 115,200bps
  •  Various Protocols : TCP/IP, Multicast, UDP, HTTP, SMTP, FTP, DHCP, DNS, Dynamic DNS, RTP, RTSP, SNMP
  •  Full Technical Support with SDK & API